Напівпричіп з робочою платформоюFAYMONVILLE
Doppeltele, MAX Trailer MAX210 Telesattel
Напівпричіп з робочою платформою
FAYMONVILLE
Doppeltele, MAX Trailer MAX210 Telesattel
фіксована ціна додається ПДВ
98 900 EUR
Стан
Вживаний
Місцезнаходження
Essen 

Зображення показують
Показати карту
Дані про машину
Ціна та місцезнаходження
фіксована ціна додається ПДВ
98 900 EUR
- Місцезнаходження продавця:
- Heegstraße 6-8, 45356 Essen, Німеччина
Зателефонувати
Технічні деталі
- Загальна вага:
- 48 000 кг
- Максимальна вага навантаження:
- 36 300 кг
- Конфігурація осей:
- 3 осі
- Перша реєстрація:
- 08/2024
- Наступна перевірка (TÜV):
- 08/2025
- Загальна ширина:
- 2 540 мм
- Обладнання:
- ABS
Деталі пропозиції
- ID оголошення:
- A12865280
- Референсний номер:
- 31536
- оновлення:
- останній раз 29.08.2025
Опис
You can find our complete range of vehicles, including those available immediately and at short notice, on our website.
Excerpt from the equipment. Full equipment details available upon request.
- Load area in a double-extendable version with pneumatically operated locking mechanism
Dsdpfxopkx Eao Adyecn
- A fixed intermediate table, approx. 250 mm wide, mounted on the central beam
- BPW axles and suspension, all axles hydro-mechanically forced-steered
- Air suspension with lift and lower valve
- Tyres: 385/65 R 22.5
- JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
- Braking system according to EU regulations with EBS-E (2S2M)
- Disc brakes
- 2-inch kingpin
- Electro-hydraulic unit
- Remote steering from the front and rear via cable remote control
- 10 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the load area
- Load gauge for axle load determination, including load diagram
- A galvanized steel front wall (EN12642-XL), approx. 1,600 mm high
- 6 pairs of WADER container locks embedded in the load area, for 1 x 20' container, 2 x 20' containers or 1 x 40' container. An additional locking point is provided in the extension for a 45' container
- 5 pairs of crosswise mounted stake pocket strips in the load area
- Storage for max. 9 pairs of plug-in stakes approx. 100 x 50 mm, inside on the front wall
- One tool box INOX, approx. 1,200 x 460 x 550 mm, mounted at the front under the load area on the left and right
- Central lubrication system with 2 BEKAMAX pumps (Pico)
- 2 LED reversing lights mounted on the rear panel
- Acoustic warning signal when reversing
- Collision protection left and right on the rear crossmember
- 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear
- HRM metallization (High Resistance Metallisation)
- Single-colour paintwork in RAL 3002 carmine red
Оголошення було перекладено автоматично. Можливі помилки перекладу.
Excerpt from the equipment. Full equipment details available upon request.
- Load area in a double-extendable version with pneumatically operated locking mechanism
Dsdpfxopkx Eao Adyecn
- A fixed intermediate table, approx. 250 mm wide, mounted on the central beam
- BPW axles and suspension, all axles hydro-mechanically forced-steered
- Air suspension with lift and lower valve
- Tyres: 385/65 R 22.5
- JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
- Braking system according to EU regulations with EBS-E (2S2M)
- Disc brakes
- 2-inch kingpin
- Electro-hydraulic unit
- Remote steering from the front and rear via cable remote control
- 10 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the load area
- Load gauge for axle load determination, including load diagram
- A galvanized steel front wall (EN12642-XL), approx. 1,600 mm high
- 6 pairs of WADER container locks embedded in the load area, for 1 x 20' container, 2 x 20' containers or 1 x 40' container. An additional locking point is provided in the extension for a 45' container
- 5 pairs of crosswise mounted stake pocket strips in the load area
- Storage for max. 9 pairs of plug-in stakes approx. 100 x 50 mm, inside on the front wall
- One tool box INOX, approx. 1,200 x 460 x 550 mm, mounted at the front under the load area on the left and right
- Central lubrication system with 2 BEKAMAX pumps (Pico)
- 2 LED reversing lights mounted on the rear panel
- Acoustic warning signal when reversing
- Collision protection left and right on the rear crossmember
- 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear
- HRM metallization (High Resistance Metallisation)
- Single-colour paintwork in RAL 3002 carmine red
Оголошення було перекладено автоматично. Можливі помилки перекладу.
Постачальник
Примітка: Зареєструйтеся безкоштовно або увійдіть в систему, щоб отримати доступ до всієї інформації.
Зареєстровано з: 2003
Відправити запит
Телефон & Факс
+49 201 8... оголошення
Ваше оголошення було успішно видалено
Виникла помилка