Напівпричіп силос

O.M.E.P.S. CR 47

O.ME.P.S Tipping Silo Trailer—Type: CR 47

Chassis:
Two fully automatically welded I-shaped longitudinal beams with welded cross members, chassis width 1,400 mm, 2" king pin, tipping cylinder: Hyva

Axles and Suspension:
22.5" disc brakes, 3x 9t SAF axle units with air suspension, axle spacing of 2 x 1310 mm, lift and lower valve, loading pressure gauge mounted on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring system, 1st axle liftable without tractor unit equipment, 3rd axle liftable with Wabco Optiturn

Wheels and Tires:
6 wheels with 385/65 R22.5 tires, manufacturer’s choice on Alcoa Dura Bright aluminum rims, size 11.75x22.5 ET 120

Brake System:
EBS 4S/2M WABCO compressed air brake system with RSS, according to standard 98/12/CE – ECE R13/09, connected brake wear indicator
Pjdpfx Ajx Nufmsaaspl

Landing Gear:
Mechanical landing legs with two speeds, 2x 20t support load with pivoting foot, rear without landing support

Electrical System:
All lights are LED, 24 V electrical installation consisting of: one 15-pin socket mounted in front of the fifth wheel plate on the chassis beam, required number of yellow side marker lights, rear position lights, front marker lights, rear license plate lights, lights according to standard 97/28/CE-2007/35/CE, two multifunction rear lights mounted at the pivot height in aluminum brackets according to standard 97/28/CE-2007/35/CE, one LED work light on the tank, yellow warning beacon at the rear, mounted at hose pipe height, 2x reverse lights in underrun protection, 2x reverse lights at landing leg height (each switchable on the power console)

Tank Version:
A horizontal tank made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). Single-chamber tank, 47,000 liter capacity, tank warranty: 24 months from delivery. Operating parameters: pressure vessel according to Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar – operating pressure 2.0 bar, operating temperature -40° to +80°C

Filling Options:
4 manholes DN 450 with swing and hinged dome covers. The dome covers are sealed pressure-tight with 4 wing nuts each, rubber supports on top for dome covers, drip rail closed at the front, open at the rear

Material Discharge:
1 material discharge cone DN 800 made of stainless steel, folding with stainless steel agitator disc, material discharge cone can swing sideways, shut-off valve DN 150 with white gasket, connection: STORZ-A

Air Piping:
A 2.5'' stainless steel main air line mounted right side operations, one 4" stainless steel air distributor pipe mounted at the rear of the tank, air valves (shut-off flaps) in INOX, upper air hose and air connection hoses are in 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1m in front of the pivot

Ladder and Walkway:
1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety scissor guardrail, can be raised with a separate fold-out ladder section from below with parking brake when open, 1 aluminum safety walkway runs along the top left of the tank, anti-slip coating on the tank

Delivery Hose Compartment:
4 hose tube containers 5 m long, DN 200, made of aluminum with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76

Accessories:
The side underrun protection is made of anodized aluminum, left side

Оголошення було перекладено автоматично. Можливі помилки перекладу.