Низькорамний напівпричіп

FAYMONVILLE Multimax Satteltieflader (2+2) - nachlaufgelenkt

You can find our complete stock of vehicles, including those available immediately and at short notice, on our website.

Selection of features. Complete specification available on request.

Gooseneck:
* Gooseneck in SNT design to optimize loading area length, approx. 3,700 mm, with rear chamfer approx. 1,000 mm x 10°
* Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4

Loading Area:
* Loading area with extendable design, approx. 8,800 mm long with rear chamfer approx. 500 mm x 10°
* Recess in the loading area extending into the chamfer for holding an excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H)

Ramps:
* Pair of two-piece steel ramps, approx. 4,350 mm long and approx. 900 mm wide
* Rubber covering
* Hydraulically folding ramp tips
* Ramps hydraulically adjustable individually, approx. 235 mm outwards and approx. 215 mm inwards

Axles and Suspension:
* BPW axles and suspension, 1st and 2nd axle fixed, 3rd and 4th axles steering
* 3rd and 4th axle with electromagnetic reverse interlock, controlled by reverse gear and manual activation
* Technical axle load: 12,000 kg
* Air suspension with raise and lower valve

Tyres:
* 235/75 R 17.5 3PMSF twin tyres

Brake System:
* WABCO EBS-E braking system in accordance with EU regulations

Trailer Colour:
* RAL 3002 Carmine Red

Accessories included:
* Plug-in steel front wall, approx. 400 mm high
* 3 kW electro-hydraulic power pack to control hydraulic operations
* TPMS tyre pressure monitoring system according to ECE R 141
* On the gooseneck: 1 pair plug-in aluminium side walls and rear wall
* Mechanical landing legs with 2-speed gearbox and crank handle
* Continuous hardwood floor approx. 50 mm thick over the loading area, interrupted between the axles (increases coefficient of friction)
* 1 intermediate platform with recessed loading area, approx. 300 mm wide
* For the intermediate platform, approx. 300 mm wide, a mechanical lock for securing it on the extension
* Extendable (galvanised) side extensions, approx. 230 mm per side (excluding wooden planks)
* 1 pair of permanently installed wheel recesses up to the extension, approx. 700 x 410 mm (W x D), in the loading area in front of the 1st axle
* Between the 2nd and 3rd axle in the loading area: 1 pair of permanently installed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D)
* Covers for wheel recesses, split in longitudinal direction, with wooden covering and external securing plugs
* Control valves for hydraulic ramps on the right side of the vehicle
Lodpfx Agoyc Ax Hsbshb
* 1 pair of mechanical rear supports
* Super Grip 25 mm rubber flooring and approx. 5 mm steel plate as additional reinforcement on the sloped loading area
* Includes widening planks to widen the area below the wheel recesses
* 1-piece INOX toolbox, approx. 2,480 x 340 x 390 mm (L x W x H), straight version, with 2 external side doors and 1 top lid, mounted behind the front wall on the gooseneck
* Removable steel-edged widening planks
* Centralised lubrication system with 1 pump, BEKAMAX brand, filled with standard grease according to NLGI-2
* 1st axle with automatic lift axle function and traction aid compliant with EU Directive 1230/2012
* HRM metallization of the entire vehicle chassis using ZINACOR 850 (85% zinc/15% aluminium) for optimal corrosion protection

Оголошення було перекладено автоматично. Можливі помилки перекладу.