Купити вживані машини (200 000)

Стан: новий, Рік виготовлення: 2024, Функціональність: повністю працездатний, охолоджувальна здатність: 644 кВт (875,60 к.с.), тип вхідного струму: трифазний, тип охолодження: повітря, загальна вага: 5 620 кг, вхідна напруга: 400 V, загальна ширина: 2 200 мм, загальна довжина: 7 800 мм, загальна висота: 2 500 мм, строк гарантії: 6 місяці, Повітряний чилер PANASONIC ECO i W SW N EVO P SWVN0660CA 644 кВт Холодопродуктивність: 644 кВт / 183,12 тонн (12/7 — 35°C) Рік випуску: 2024 Холодильний контур: 2 шт. Теплообмінник: кожухотрубний Конденсатор: мікроканальний, алюмінієвий Duodjwnrtlepfx Ac Esu Компресори: 1 шт. Bitzer CSH8593-140Y-40D (гвинтовий) + 1 шт. Bitzer CSVH24-125Y-40A (гвинтовий, інверторний) Тип холодоагенту: R513a Кількість вентиляторів: 14 шт. (EC-вентилятори) Габаритні розміри: 7,8x2,2x2,5 м Вага: 5620 кг Напрацювання: 0/0 год. Стан: Новий СТАН, ТЕСТУВАННЯ ТА ГОТОВНІСТЬ Чилер / холодильно-водяна установка / проходить сім етапів технічної перевірки та верифікації робочих параметрів. Тестується на власній випробувальній станції з підключенням до води (або гліколю) та налаштуванням параметрів згідно з Вашими вимогами. Після випробувань Ви отримаєте детальний звіт про експлуатаційні характеристики та загальний стан чилера. Чилер / холодильно-водяна установка / готовий до транспортування та монтажу. Наші інженери допоможуть з розрахунком необхідної холодопродуктивності, вибором оптимальної схеми охолодження та конфігурацією необхідних опцій обладнання. ГАРАНТІЯ ТА ПІДТРИМКА Якість обладнання підтверджується гарантією від 6 до 36 місяців. ЛОГІСТИКА - Доставка по всьому світу - Підтримка у навантаженні, оформленні експортної документації та координації логістики Отримайте детальну консультацію. Фото, відео та повний звіт з випробувань надаються на запит.

Стан: новий, Рік виготовлення: 2026, Model BS-500 characteristics:  Power block (Petrol Engine HONDA GX-160, air-cooled - 3.6 кWt)  Engine power – 3.6 kw (4.8 hp.)  Fuel gasoline – A92 and above.  Fuel consumption – 1.4 liters\hours.  Gear pump.  Torch power – 75 kw.  Gear reducer.  The gas burner operating pressure – 1 bar.  The gas cylinder recommended capacity – 27 l.  The sprayer rod length – 4 m.  The spray bar length – 1.5 m.  The spraying by spray bar width – 1.7 m. (7 nozzles of Italian origin).  Hand sprayer productivity – 4 l/m.  Spray bar productivity – 28 l/m.  Consumption of bitumen emulsion – 0.8 l/sq. m.  Emulsion tank – 500 l.  Weight (without emulsion) – 370 kg.  Warranty – 1 year. Dsdped Swg Hjfx Ac Eeuu *is sold without a trailer Advantages: • 4-stage cleaning system. • Universal assembly system. • Pump system with the built-in filter for filling in/out the tank with bitumen emulsion. • Built-in heating system (gas propane burner). BS-500 can be mounted on a trailer or transport vehicle like pick-up.

Стан: новий, Рік виготовлення: 2026, BITUMEN EMULSION SPRAYER ABS-8000 Bitumen Emulsion Sprayer ABS 8000 – is the optimal equipment for performing large volumes of work in the shortest possible time. Autonomous diesel engine makes it possible to install the equipment on any truck. Theelements of control are located on a separate panel in the driver’s cab with partial redundancy in the control cabinet, which facilitates the adjustment of equipment and the transition of its working bodies from the transport to the working position. High quality bitumen pump and shut-off valves ensure trouble-free operation of the equipment. SPECIFICATIONS Density of surface coating – from 100 g / m2 to 1600 g / m2 Spraying width – from 2 m to 3.7 m Cleaning system. Tank capacity 8000 l. Function of tank self-pumping. Spraying barblowing by compressor. Rear view camera with monitor in driver’s cab. Dusdpfx Acovpt Dce Eou Bitumen emulsion spraying dosing control (g/m2) via touch screen display in driver’s cab. The system for heating the bitumen emulsion with a diesel burner (Italy). Spraying rod control equipment (lowering and expanding) by means of a remote control in the driver’s cab and on the vehicle body. REQUEST A CALL Buy BITUMEN EMULSION SPRAYERS TM TICAB – the best decision for you! Our price is competitive today and tomorrow. Specifications: Density of surface coating – from 100 g/m2 to 1600 g/m2; Spraying width – from 2 m to 3.7 m; Cleaning system; Tank capacity 8000 l; Function of tank self-pumping; Spraying bar blowing by compressor; Rear view camera with monitor in driver's cab; Bitumen emulsion spraying dosing control (g/m2) via touch screen display in driver's cab; The system for heating the bitumen emulsion with a diesel burner (Italy); Spraying rod control equipment (lowering and expanding) using a remote control inside the driver's cab and on the sprayer body.

Стан: новий, Рік виготовлення: 2026, Autonomous spreader of sand-salt mixture RPS-1500 from ТМ TlSAV - is a powerful equipment for high-quality spreading of roads and pavements with de-icing materials, which allows to minimize the use of manual labour and reduce the accident and risk of injury to people. The spreader is equipped with a 1.5 m³ hopper with a scraper-chain feeding mechanism and a disc for spreading materials. Thanks to its autonomy and compact dimensions it can be used with any vehicle. CHARACTERISTICS -Spreading width, depending on disc speed - 3-6 m. - Hydraulic drive mechanisms. -Adjustment of the disc inclination (manual). -Mix feeding mechanism - scraper-chain. -System of proportional control of disc rotation speed on the control unit in the driver's cab - (optional). - Control of the equipment by remote control from the driver's cab. - It has its own wheelbase or can be mounted on the customer's vehicle. TICAB is a manufacturer of road machines: bitumen emulsion sprayers, joint and crack fillers, asphalt recyclers, street hoovers, universal loaders and other road machinery. High European quality, competitive prices. If we do not have an official representative office in your country, we are looking for a distributor! We will be glad to contact you! Sand spreader with capacity of 6 cubic metres (9 tonnes of mixture) for treatment of carriageway with anti-icing materials (sand, salt, sand-salt mixture) in winter period and transportation of asphalt concrete mixture in summer period. Sand spreaders are installed in the lorry body with the help of a crane. Duedpfsvpp S Nsx Ac Eju -Dimensions: L-4.5 m; W-2.10 m; H-1.85 m - Travelling speed - up to 30 km/h. - Strip treatment width up to 10 m, spreading density - up to 350 g /m. - Adjustment of width and density of spreading - on the body of the spreader. -Feed distributor is disc-shaped (stainless steel), equipped with a protective cover, height adjustable, equipped with a hydraulic motor. - Power take-off of the hydraulic system - from the standard power take-off box of the vehicle. -Scraper-chain sand (salt) feeding is equipped with a hydraulic motor, with protection against ingress of small foreign objects. - Adjustment of scattering ‘right-left-proportional’. - Control (ON/OFF) from the driver's cab.

Стан: новий, Рік виготовлення: 2026, Melt and apply asphalt crack filler machine Combo has a wide range of applications. BCM-120 is professional equipment that has proven itself in the road construction industry, maintenance or repair of road surfaces. Trailed asphalt distributor ensures accurate and efficient spreading of bitumen emulsion. An upgraded bitumen machine BCM-120 runs on diesel engine with hydraulic pump drive and heats emulsion from diesel burner. The bitumen emulsion sprayer is equipped with a separate tank. Another one is installed to be filled with mastic. Materials are mixed manually. A crack sealer has an automatic control of mastic heating and the purging system. GENERAL 1. Diesel engine – 14-18 hp 2. Compressor receiver – 25L 3. Pumps drive – hydraulic CRACK SEALER 1. Bitumen tank – 120L 2. Bitumen pump – up to 10L/min, 5 bar 3. Hand spraying rod + hose 2m (not heated) 4. Manual mixing 5. Bitumen heating – diesel/gas burner 6. Heating control – automatic 7. Blowing system BITUMEN EMULSION SPRAYER 1. Emulsion tank – 1000L 2. Pump – 36L/min, 2 bar 3. Emulsion heating – diesel/gas burner 4. Hand spraying rod + hose 4m 5. Spraying bar 7 nozzles 6. Pipe line cleaning system and spray bar blowing Dedpfx Acsvptd Ne Esuu Advantages -You get a bitumen emulsion sprayer and a crack sealer in one machine. -An economical diesel engine comes as standard. -You can heat the mixture from gas or electricity. -We offer the price from the manufacture and unsurpassed service.

Стан: новий, Рік виготовлення: 2026, Our self-propelled bitumen spraying machine is one of the most powerful models in the line of mini bitumen sprayers. It is mounted on a trailer to deliver it to the site. The machine is equipped with a drive wheel and a remote control, which allows you to leave it on the object to work autonomously, without involving a traction car. Even an employee without experience can manage a self-propelled BS-1000 SP. SELF-PROPELLED BITUMEN EMULSION SPRAYER BS 1000-SP. TM TICAB self-propelled Bitumen Emulsion Sprayer BS-1000-SP is the most powerfull mini bitumen emulsion sprayer among all TICAB mini sprayers. Dedpfx Aovpg Izec Ejuu Spray bar 1,5m (7 nozzles) covers up to 2000 sq.m per hour. Tank 1000 L. Repair work in the shortest possible time both on small areas (household areas, alleys) and on the bigger areas. Self-propelled system fits any trailer. Car is needed just to move he BS-1000-SP sprayer to the construction side. It makes using the sprayer much easier and increases its maneuverability. Operate remotely using a joystick. Specifications: Gasoline engine – 16 hp; Productivity – 30 l/min; Spraying width – 1.7 m; System cleaning – 3-level, diesel fuel; Self-pumping function of the tank; Installation on a frame or on a trailer at the customer's request; Heating system of the emulsion tank; Tank – 1000 l; Possibility of connecting an extra compressor for spraying bar cleaning; Thermal sensor – mechanical; Burner – propane; Hand spraying rod; Self-propelled traction hydraulic wheel. TICAB Manufacturer of road machines: bitumen emulsion sprayers, crack sealing mahines, asphalt recyclers, street vacuum cleaners, universal loaders and other road machines. The highest European quality, competitive prices. If we do not have an official representative office in your country, we are looking for a distributor there! We are looking forward to contact with you!

Стан: новий, Рік виготовлення: 2026, Asphalt Hot Box / Asphalt Recycler НВ-1/Recycler Asphalt Hot Box / Asphalt Recycler HB-1 is designed to maintain the working properties and temperature of hot asphalt during its transportation from the asphalt plant to the place of work and in its process. High quality thermal insulating mineral wool, which is installed around the working tank, is used for thermal insulation. The unit also has the function of asphalt recycling with an infrared heater located at the top. The asphalt is heated on a grate. SPECIFICATIONS: Duodpfx Aovprxxoc Esu - Volume - 0,4 m3 - Capacity is 2-2.5 tons per 8 hours. - Propane fuel - Consumption - 3-4 kg / h (depending on the outside temperature) - Mechanical control (open fire ignition system)

Стан: новий, Функціональність: повністю працездатний, Рік виготовлення: 2026, Bitumen Emulsion Sprayer BS‑200 – 200 L Asphalt Distributor | Road Construction Equipment The BS‑200 bitumen emulsion sprayer by TICAB is a compact, reliable, and easy‑to‑operate bitumen sprayer / asphalt distributor designed for road repair, resurfacing, and surface priming before asphalt laying. With its 200 L capacity, this unit is ideal for small‑to‑medium road maintenance jobs where precise and uniform spraying of bitumen emulsion is required. Key Features 200 L bitumen emulsion sprayer – compact and efficient Uniform and accurate spraying for road surface treatment Smooth operation for asphalt maintenance, patching, and repair Ideal for roads, parking lots, driveways, and pathways Portable design that can be mounted on a trailer or platform Reduces material waste with controlled dosing and spray flow Technical Specifications Dujdpfx Acjvphito Eou Tank capacity: 200 L Effective emulsion spraying system for even coverage Can be mounted on frame or trailer at customer request Heating system for bitumen emulsion Self‑pumping tank function 3‑level cleaning system (diesel fuel) Manual spray rod for targeted application Optional connection for external compressor to clean spray bar Applications Precise bitumen emulsion spraying before asphalt paving Asphalt road repair and maintenance Tack coat / prime coat application Parking lots, sidewalks, driveways Municipal and contractor roadworks The BS‑200 Bitumen Emulsion Sprayer from TICAB is an efficient and cost‑effective solution for companies seeking a small asphalt sprayer that delivers consistent performance, accurate emulsion distribution, and reliable road surface preparation. Condition: new Manufacturer: TICAB Delivery: worldwide

Стан: новий, Функціональність: повністю працездатний, Рік виготовлення: 2026, Pothole Repair Complex MIRA-3(price doesn’t include the trailer) Pothole Repair Complex MIRA-3 by TICAB TM is a unique road repair system developed by TICAB engineers for optimization of road patching works. MIRA-3 complex includes infrared asphalt heater, asphalt recycler and bitumen emulsion sprayer. How to use MIRA-3 Complex: - Heating of the repair place. - Add a hot asphalt from the asphalt recycler. - Spraying the bitumen emulsion. Djdpfx Ajt Itzzsc Ejuu MIRA-3 includes: - Infrared Asphalt Heater MIRA-3. - Bitumen Emulsion Sprayer BS-100. - Asphalt Recycler RA-500.

Стан: новий, Рік виготовлення: 2026, Bitumen Emulsion Sprayer BS-1000 Bitumen Emulsion Sprayer BS-1000 is designed for priming the surfaces prior to asphalt laying, asphalting adjacent areas, as well as for pouring seams and cracks with bitumen emulsion. Bitumen emulsion is supplied from a 1000 l tank, which is installed directly on the fixing platform. Heating system allows the bitumen emulsion to be sprayed in a cold time. It is easy to use. It has its own cleaning system. Made on a steel frame, or mounted on a trailer. SPECIFICATIONS: Dedpsvptnuofx Ac Ejuu - Productivity – 36 l/min. - Spraying width - 2,2 m. - Cleaning System - 3-level, diesel fuel. - Self-pumping function of the tank. - Installation on a frame or on a trailer at the customer's request. - Heating system of the emulsion tank. - Tank 1000 l. - Possibility of connecting an extra compressor for spraying bar cleaning. - Thermal sensor - mechanical. - Hand spraying rod

Стан: новий, Рік виготовлення: 2026, BITUMEN EMULSION SPRAYER BS-2000 - Spray bar for 11 nozzles with a width of 2.4 m - Spray width with tyre - 2.4-2.8 m - System cleaning - 3-level, diesel fuel - Tanker self-pumping function - Mounting on a frame or on a trailer on request - Emulsion tank heating system - Own 2000 l tank - Possibility of connecting a third-party compressor for cleaning the sprinkler bar - Mechanical thermal sensor - Lance for manual sprinkling Completing: - Tank truck 2000 l - Power block - Hose - 4m with rod and nozzle for manual spraying - Hoses for supplying bitumen emulsion - Spray bar for emulsion with 11 nozzles - Gas burner with regulator Specifications: Power block (Petrol Engine HONDA GX-200) Engine power – 4.1 kw - Spray rate of bitumen emulsion with hand lance4 l/min - Spraying rate of bitumen emulsion through tyre 55 l/min - Engine 4-stroke petrol engine with air cooling - Bitumen emulsion consumption 0.8 l/m2 - Tank capacity 2000 l - Recommended gas cylinder 27 l (not included) Duodsvpg Eajpfx Ac Eju - Overall dimensions (portable) without trailer 257*190*160 cm - Shoulder weight (without emulsion) 715 kg

Стан: новий, Функціональність: повністю працездатний, Рік виготовлення: 2026, The HOTBOX HB-2 is made to save appropriate properties of a hot asphalt. It is necessary during transport of the asphalt from plant to repair place. With Asphalt Hot Box HB-2 by TICAB you can deliver hot asphalt from the asphalt plant to the place of road works, with minimal heating loss. Thermal insulation of the container with quality mineral wool allows to keep the working temperature of the asphalt up to 12 hours without additional heating. At the same time, the HB-2 is additionally equipped with a Beckett diesel heating system and a Thermal Controller. HB-2 is equipped with a hydraulic lifting system. There is a manhole on the top of the tank for loading the hot asphalt. Asphalt Hot Box HB-2 by TICAB is easily mounted on the truck body or on a trailer. HB-2 characteristics: – whole year work; – last payback; Dodpet It Dvefx Ac Eeuu – comparably higher repair quality using “hot-to-hot” technology; – automatic asphalt temperature controller; – diesel burner; – autonomous hydraulic system; – powered by car battery; – mounted on a truck or trailer; – Tank capacity 1.3 m³ (2 tons of hot asphalt)

Стан: новий, Функціональність: повністю працездатний, Рік виготовлення: 2026, BS-500 PRO Even the best road coating wears during exploitation. Heavy traffic, unfavorable weather conditions, and other factors negatively affect the asphalt. Bitumen pressure distributor BS-500 PRO – is the number-one equipment to protect the load-bearing structure of the road with surface treatment. The model has a safe and inexpensive heating system, responsible for maintaining the required temperature of the emulsion. The 500-liter emulsion tank is insulated with solid mineral wool. Technical Specifications Engine power (petrol, air cooled)-4.3 kW (5.8 hp) Emulsion tank capacity-500 l Productivity-28 l/min Nozzles on the spraying bar- 7 pcs Spraying width-1.7 m Diesel cleaning system Duodpfx Acsvuacce Eou Spraying bar is modularised, consisting of 3 sections, with rubber protection plates that protect against contamination and emulsion in unplanned areas Remote control of the spraying bar Electric starter Tank self priming function Emulsion tank heating system Ability to connect a third party compressor for cleaning the spraying bar

Стан: новий, Рік виготовлення: 2026, Hot air lance for cleaning asphalt cracks is convenient and economical equipment on wheels, which helps you prepare seams and cracks in the road surface for sealing them with bitumen or bitumen-polymer materials. A powerful stream of hot air removes moisture and particles of debris, grass, soil, dust, dirt, small stones, etc., leaving cracks dry, clean, and ready for filling with bitumen materials. Hot air lance burner for seam treatment is used during preventive maintenance of the road surface. Equipment becomes indispensable in small areas (sidewalks, parking lots) where it is difficult or impossible to work with large compressors. Purchasing of a self-propelled bitumen spraying machine means a significant cost savings due minimal material spent during the workflow. Precise control of the amount of bitumen emulsion and fixed coating width makes it easy for you to optimize bitumen usage. In addition, our top-notch production quality ensures high overall equipment performance. As a result, you complete projects faster, increasing profitability and the number of satisfied customers. Dusdovpqp Aopfx Ac Eeu Advantages Heat lance is mobile equipment, easy to transport it from one site to another. The output temperature reaches 4000℃. You get the price and warranty service from the manufacturer. Sufficient power with small dimensions and weight.

Стан: новий, Функціональність: повністю працездатний, тип пального: газ, Рік виготовлення: 2026, Обладнання: 4-в-1 ковш, Infrared Asphalt Heater MIRA-1 Infrared Asphalt Heater MIRA-1 by TICAB TM is compact and powerful device. Best for small patch repairs. It is quite reliable and highly effective in use SPECIFICATIONS: - Propane fuel. - Controls - mechanical. - 2 gas bottles. - Consumption - 5-5.5 kg / h (depending on the outside temperature). Dnh0Wn - Weight 120 kg. Dsdpfeq Rcrqsx Ac Eouu Effective in the repair of: • Potholes. • Raising manhole and utility covers. • Failed pavement joints. • Joint asphalt repair.

Стан: новий, Функціональність: повністю працездатний, Рік виготовлення: 2025, BPM-120 CRACK SEALING MACHINE TICAB LLC (Trade Industrial Company AB) — a leading manufacturer of road maintenance equipment in Europe — offers you a cost-effective solution for efficient local repair of asphalt concrete surfaces: the BPM-120 crack and joint sealing machine. Main Application: The BPM-120 fills cracks and joints on asphalt roads, parking lots, sidewalks, airfields, and other road infrastructure facilities. Designed for small- and medium-scale projects! BPM-120 Technical Specifications: • Bitumen emulsion tank: 120 liters • Bitumen pump: capacity up to 10 l/min, working pressure up to 5 bar • Feed system: manual spray wand + 2 m hose (non-heated) • Mixing: manual • Bitumen heating system: diesel burner • Temperature control: automatic (maintains preset temperature) • Purge system: allows cleaning of hose and spray wand after work is completed Thoughtful design for your comfort and safety! Advantages of the BPM-120 model: • Compact size and mobility • Easy to maintain and operate • Direct heating with diesel fuel (no oil layer) • Energy-efficient fuel consumption • High-quality crack and joint sealing ensures pavement durability • Simple construction guarantees reliability in operation Price: • €13,000 without trailer Duedpfovrialex Ac Esu • €15,200 with trailer Delivery Terms: • Production time: up to 20 business days after order confirmation • Warranty: 12 months • Delivery: from the manufacturer’s warehouse • Support: manual, technical assistance, video instructions Contact us today for a personalized consultation! Choose equipment that delivers results — send your inquiry now!

Стан: новий, Рік виготовлення: 2026, TITAN large format printer for business and creativity Looking for a large format printer for your business? TITAN is an innovative machine for high-quality and accurate printing in manufacturing, private companies, and other commercial premises. The versatility of the printing equipment allows you to bring your boldest ideas to life on a variety of surfaces. Its efficiency, ergonomic design and ease of use provide maximum opportunities for your business to grow. This innovative solution guarantees its productive implementation in the creation of personalised packaging. You can buy a CMYK printer at the manufacturer's price. Our company is a developer and manufacturer of digital printing equipment. We work without intermediaries. Our flexible approach to partnership and cooperation allows us to make profitable commercial offers according to your business needs and expectations. TITAN printing equipment includes Dujdjvt Uvzopfx Ac Esu Print head with HP Fl-1000 module Table with conveyor belt Control panel Laser positioner TICAB PRINT software PRINT HEAD SPECIFICATIONS Print area width up to 297 mm (11.7 inches) Print area length from 2.54 cm (1 inch) to 91.44 cm (36 inches) Print speed up to 18 inches per second Print speed up to 90 A4 sheets per minute up to 16 A3 sheets per minute Print resolution Print resolution 1200x1200 DPI (from 600x600 DPI) in high quality mode 600x1200 DPI (from 300x300 DPI) in production mode Number of inkjet nozzles 59,136 (14 print zones with 4,224 nozzles in each) Colour palette CMYK (Cyan, Magenta, Yellow, Black) Information connection Ethernet 10/100/1000 Base-T network port Supported OS Windows (Windows 10 recommended) Ink type Water-based pigment ink SOFTWARE Printer status monitoring Print count (total and current) Ink consumption calculation Cartridge ink level monitoring Nozzle maintenance and cleaning functions Service Tray usage monitoring Printer nozzle calibration for linearity and colour uniformity High-speed printing of large quantities POSITIONING SYSTEM The print head can be raised to a height of up to 10 cm. Lifting and lowering is carried out by a motorised screw, the nut of which is mounted on a fork with horizontal guides, along which the printer can be moved and lowered onto the carriage in the required position. Conveyor belt - installed horizontally on the main module and designed to pull the workpiece through the printing area at a specified speed. Control panel - has buttons and controls for controlling the actuators.

Стан: новий, Рік виготовлення: 2026, Функціональність: повністю працездатний, Industrial Company AB is a polish manufacturer of modern professional equipment trusted by professionals in 51 countries worldwide. Industrial printer Ticab Printing System TPS for inkjet large format contactless full-color CMYK printing. OUR ADVANTAGES : 1) printing from 1 pc to 50 units per minute 2) low cost per copy - 0.01 euro/unit 3) flexibility - printing on different materials: paper bags, cardboard, boxes assembled and disassembled, envelopes, textiles, wood 4) easiness in operation, own development TICAB software 5) we are official partners of the american company Hewlett Packard 6) permanent technical support of customers 7) the ability to improve or change the equipment to the individual needs of the client with our own production and engineering potential 8) accessories to the printer of our own design 9) we have 10 years of experience in machine building, we are employing 12 engineers. Ticab Printing System TPS is an innovative cantilever system. It allows to feed huge items beneath the print head. The print head can be adjusted up to 30 cm above the conveyor belt to feed folded cardboard boxes or other huge items. High quality Hewlett Packard HP pigment ink provides resistance to the fading, scratches and water after the image dries. Technical characteristics of the print head: Print area width - up to 29.7cm (11.7 in) Print area length - from 2.54 cm (1 inch) to 91.44 cm (36 inch) Workpiece movement speed - up to 45.72 cm (18 in) per second Printing speed - up to 90 arc\ min A4, up to 16 arc\ min A3 Print resolution - 1200x1200dpi Number of inkjet nozzles - 59136 (14 printing zones of 4224 nozzles each) Colors - CMYK (Cyan, Magenta, Yellow, Black) Ink type - water-based pigment ink Information connection - Ethernet 10/100/1000 Base-T network port Operating system - Windows (recommended Windows10) HewlettPackard HP driver TICAB software: The current status of the printer is being monitored. Number of prints is calculated - the total and the current task. The calculation of the value of ink consumption. Duodpsu Ibhwjfx Ac Esu Monitoring the current level of ink in the cartridges Starting the printer nozzle maintenance and cleaning functions. Starting the procedures for replacing the cleaning mechanism. Calibrate the printer nozzles for linearity and color uniformity. Start the procedure for high-speed printing of a large number of copies.

Стан: новий, Функціональність: повністю працездатний, Рік виготовлення: 2026, RPS-6000/9000 SALT & SAND SPREADER TICAB (Trade Industrial Company AB) — a leading manufacturer of road maintenance equipment in Europe — offers you a cost-effective solution for efficient local repair and maintenance of asphalt concrete surfaces. Salt and Sand Spreader RPS-6000/9000 TM TICAB is a perfect solution for de-icing the streets and highways. New Salt and Sand Spreaders RPS-6000/9000 with 6 m3/9m3 capacity are made for spreading de-icing agents. Allowable outside temperature is to -40°С. The spreader should be mounted on a truck using a crane. The salt spreader RPS-6000/9000 is a prospective investment. Fits any truck. Technical Specifications Duodpfxet N Ty Te Ac Eju ● Recommended velocity up to 30 km / h. ● The spreading density is 350 g/m2. ● The spreading width is up to 4-8 m. ● Width and density regulation from the Spreader body. ● Disc spreader stainless steel. Position regulating. ● Autonomous (diesel engine). ● Feed mechanism - conveyor chain. ● Adjusting the spreading angle. ● Protective awning. ● «ON» / «OFF» from the driver’s cab. ● In-cab adjustment of width and density of spreading. Service Terms ● In stock ● Warranty: 12 months ● Delivery: from the manufacturer’s warehouse ● Support: manual, technical assistance, video instructions

Стан: відремонтований в майстерні (вживаний), Рік виготовлення: 1997, мотогодини: 5 929 h, Функціональність: повністю працездатний, висота центру: 100 мм, довжина шліфування: 400 мм, ширина по центру: 400 мм, діаметр шліфувального круга: 350 мм, ширина шліфувального круга: 30 мм, Машина була капітально відремонтована у 2026 році! ТЕХНІЧНІ ХАРАКТЕРИСТИКИ Довжина шліфування: 400 мм Висота центрів: 100 мм Відстань між центрами: 400 мм Максимальна вага заготовки між центрами у задньому шпинделі: 20 кг Максимальний діаметр шліфувального круга: 350 мм Ширина шліфувального круга: 30 мм Посадковий отвір шліфувального круга: 127 мм Робоча подача по осі Z: 100 - 3 500 мм/хв Поворот стола: 0 - 30° Djdpfxeza Ea Io Ac Eeuu Потужність двигуна шліфувального шпинделя: 3 кВт Частота обертання шпинделя заготовки: 30 - 1 200 об/хв Потужність шпинделя заготовки: 0,5 кВт Конус задньої бабки: MT2 Хід пінолі: 20 мм ДАНІ ПРО МАШИНУ Габаритні розміри: Розміри машини: 2 350 x 1 480 мм Вага: 1 600 кг

Стан: вживаний, Функціональність: повністю працездатний, пробіг: 344 428 км, потужність: 331 кВт (450,03 к.с.), перша реєстрація: 07/2023, тип пального: дизель, загальна вага: 8 253 кг, конфігурація осей: 4x2, колісна база: 375 мм, колір: білий, тип передачі: автоматичний, клас викидів: Євро 6, Рік виготовлення: 2023, кількість циліндрів: 6, об'єм двигуна: 13 000 см³, положення керма: лівий, Обладнання: гідропідсилювач керма, повна історія обслуговування,

Стан: вживаний, Функціональність: повністю працездатний, максимальна вага навантаження: 27 000 кг, загальна вага: 8 809 кг, конфігурація осей: 3 осі, перша реєстрація: 02/2021, загальна довжина: 14 040 мм, загальна ширина: 2 600 мм, підвіска: повітря, колір: білий, Рік виготовлення: 2020, Обладнання: гідропідсилювач керма, охолоджувальний агрегат, повна історія обслуговування,

Стан: вживаний, Функціональність: повністю працездатний, пробіг: 444 796 км, потужність: 346 кВт (470,43 к.с.), перша реєстрація: 08/2022, тип пального: дизель, загальна вага: 8 088 кг, конфігурація осей: 4x2, колісна база: 390 мм, колір: білий, тип передачі: автоматичний, клас викидів: Євро 6, Рік виготовлення: 2022, кількість циліндрів: 6, об'єм двигуна: 12 419 см³, положення керма: лівий, Обладнання: гідропідсилювач керма, повна історія обслуговування,

Стан: вживаний, Функціональність: повністю працездатний, максимальна вага навантаження: 27 000 кг, загальна вага: 8 351 кг, конфігурація осей: 3 осі, перша реєстрація: 02/2023, загальна довжина: 13 550 мм, загальна ширина: 2 600 мм, підвіска: повітря, колір: білий, Рік виготовлення: 2023, Обладнання: гідропідсилювач керма, охолоджувальний агрегат, повна історія обслуговування,

Стан: вживаний, Рік виготовлення: 2009, Токарний верстат з ЧПУ, 2 осі, DOOSAN LYNX 220LB, рік випуску 2009. Система керування Fanuc i series. Патрон 210 мм. Діаметр проходу шпинделя 51 мм. Максимальна довжина точіння 525 мм. Максимальний діаметр точіння 320 мм. Туретна головка на 12 позицій. Датчик інструменту. Задня бабка. Вловлювач деталей. В комплекті з верстатом: - Документація; - Ванна з насосом; - Тримачі, які знаходяться на туретній головці. Dedpfozai Rwsx Ac Ejuu